COST SAVING UNDERWATER CLEANING
Easy and safe operation
The YT-800 is remote controlled using a handheld radio control and can easily be operated by only one person. It can be equipped with underwater cameras to enable the operator to run the machine from a distance, for example from inside an operating room in bad weather.
The YT-800 is equipped with a powerful pump for pumping the sediment to a designated point of discharge. The sediment can be pumped directly to a sand and sludge treatment station if available at the site.
The YT-800 has electrical motors only and there are no hazardous oils or chemicals that may damage the filter.
Cleaning of Sand Filters - online
One application for the YT-800 is cleaning sand filters (slow filters). Traditional cleaning using skid-steered loaders is labour intensive and the filter has to be put out of production and completely drained. Using the YT-800 the sand filter is cleaned without draining the filter. The filter can remain in production while the YT-800 removes the algae and sediment from the filter bottom.
|Dimensions (W x L x H)||120 x 115 x 90cm|
|Drive Unit||Electrical Motors. Individually powered drive tracks|
|Suction Nozzle||Vertically adjustable with rotating screw|
|Pump Capacity||100m³ (will vary depending on length of discharge hose)|
|Speed||0.5 to 10m/min|
|Power Supply||400/480 V, 3-phase, 50/60Hz|
|Radio Control Box||Forward, backward, right, left, screw on/off, suction nozzle up/down, pump on/off|
|Floating Power Cable|
|Video Camera for improved navigation in deep water||Cleaning can be recorded and stored in VHS, CD-ROM or DVD format|
|Hydrocyclones||Realtime onboard separation of sand and algae. The sand is put back into the filter|
VoR Sludge Dehydrator. Dewatering is now made easier. Take the complexity from the process.
|Copyright © 2008 VoR Environmental Pty Ltd|